FPV-Community.com

[attachment=209]
BIPOW RC are pleased to have all the attention for the new developed FPV System for all the R/C hobby enthusiasts!!

NEW ARRIVAL

New Designed Pan/Tilt, CLICK HERE

New Head Tracker Tester Video, CLICK HERE


BackGround
We planned to finish it by 2.4G Frequency by the end of June. We had marketing research then and most hobbiests complained for the interfere of 2.4G so we improved and upgrade into this new version--2.4G & 5.8G Double Frequency TX and RX systerm, and they are as simple as change the antenna ONLY!

Product Show
Now, let's go and see the great system:

[attachment=212]

[attachment=213]

Please note that the above set is only for 2.4G transmitter, the finished set would have two sets transmitter including the 2.4G and 5.8G, and also two antenna for the goggle.


Then we go on to watch more detailed photo for the well-designed goggle:

[attachment=207]

[attachment=210]

[attachment=208]

[attachment=211]


Specification

* Support PAL/NTSC/AUTO system
* Resolution: Full COLOR 922K Pixels(640*480RGB)
* Angel of View: 32 Degree Diagonal
* Virtual Image Size: 79 INCHES Diagonal at 3.5M
* Video Input/ Output and Audio Input/ Output jack @3.5mm
* Built-in Dual-Axis Head Tracker System
* Standard 4-pin connectors for link to R/C transmitter Student/ Trainer connection

**About the Screen and FOV
The screen in our goggle are ORIGINAL KOPIN BDM-922K:

[attachment=214]

Many hobbists say that our screen are with less FOV. We noted that KOPIN is professional in this field so we do not change any FOV but just use the original KOPIN, please check original data from KOPIN:

[attachment=215]

Also, we do not change the pupillary distance of the Virtual Screen because we are convinced that KOPIN did best research on this.

[attachment=216]

Thanks for the above material and data from KOPIN.....

And then we will move to the camera, check photos firstly:

[attachment=217]

[attachment=218]

[attachment=219]

We design the camera mould particularly: it sits into the cockpit and also it can be hanged under the plane, just take out the camera and then install it contrarily into the mould.

Here it is the specification for the camera:

* Support PAL/NTSC Video Output & Audio Output
* Built-in Microphone
* Horozontal Resolution: 420 TV Line
* View Angle: 55 degree, Lens 6mm
* Video Output Level: 1Vp-p@75ohm
* Branket Rotation Angle: Horizontal Rotation 180 Degrees, Vertical Rotation 90 Degree
* Output Power: 10mW--Transmit Distance 300m; 500mW-- Transmit Distance 2000m
* 8 Channel 2.4GHz PLL FM Modulate
* Power Supply: DC 5V

And now it is turn for the introduction for the 500mW Transmitte, check photos:

[attachment=220]

[attachment=221]

And the other Accessories:

[attachment=222]

The system do not need any extra power in the goggle and Transmitte, just connect the trainer port of the FUTABA radio controller is OK...And the power for the transmitte on the plane---the power is from the source from the battery of plane.

*The cable for other brand of radio contriller would be developed in very soon time.

Finally, we make a good looking aluminum box for the system, cool looking....?

[attachment=223]

If you are not quite sure for the working and connecting for the system, please check the drafted instruction as below:

[attachment=224]

[attachment=225]

[attachment=226]

[attachment=227]

[attachment=228]

This is the DRAFT version and we welcome any suggestion to us.

Sample For Test
Samples are available for Experience FPV Enthusiasts to test--First lot of Samples ONLY for test--- Available within this month and if anyone interested, please contact us to order and we can send more information. Please click the button for Email or PM under the thread to contact us for any question.

Samples can be settled by Paypal, we are Paypal Verified member, so you do not need to worry about scamer.

What's more, we are seeking sales agents around the world to distribute this new system--if you are interested to be our agents to distribute, just send us Email: bipowrc@yahoo.com.cn and we will send you more detailed information.

If you have some more question, just contact us and we will try our best to reply you instantly!!!

---

Thanks for the great online support from the Heiko and we can finish this introduction thread smoothly. We will try to get one sample to FPV-Community Reviews, keep update!!!

---

Looks interesting! The only thing I see that I don't like is the pan/tilt mechanism. Having the pan on top of the tilt like that works ok, until you want to look down out the side of the cockpit. You would turn your head to the side, and look down. The camera however, tilts down, then rotates the camera to the side, which results in the camera leaning in relation to the horizon, when the plan is level. I always like to have the pan servo on the bottom, and the tilt axis above it.

How much are we looking at for a sample to test?

Man those look real good!!

I would like to get a set and test them.
Let me know when they are available

Hello Patrick!

Thanks a lot for showing your new products here
They all looks very good and I hope to see your new products soon

One question please: What kind of material is the white frame around the backside zone on your video goggles?
Your box looks cool, too!

See you later and keep us updated, please!
Heiko

Very interesting. But.....

I got a e-mail from them, I would love to test the system, But for the money they want to be a tester is way to much for a system that is not on the market and proven to work with no problem.

I received the email to but for the price the are charging to test $550 USD this is way to much for something that we have no idea how good it works,But it does look good besides the pan?tilt setup

You got lucky, They wanted $620 USD from me. Lol......

I offer $100 USD to test it, But never heard back from them.
I even try to go to there web site but it won't come up.

Ya that is just crazy price to test something,I don't expect it for free but that is way to much IMO!!

Maybe we can arrange a review for you guys

See you later
Best regards
Heiko

Double post!

Patrick, can you please reply to the statements of G-UNIT and VIRUSS?
I am a little bit confused now!

Please make the situation clear

Best regards
Heiko