FPV-Community.com

Polymmersion a simple and efficient plane for FPV.


This EPP airplane is cheap, less than 30€ or 45$

Link to buy it (worlwide delivery) it's polyclub:
http://www.intermodel.fr/62-eppim-v2.html

To build it you only have to buy:
2: 9grs servo
1: AX 1806N 2500kv brushless motor
1: 10A esc
1: prop 4.1X4.1 or 4.75X4.75
1: 3S 1000 battery
and all the fpv material.

How to build it in 2 hours:
1: Cut an epoxy or plywood plate and insert it in the plane perpendiculary of the flight line to fix the engine.
2: Fix the engine.
2: Insert the servo.
3: Make the rudder and elevator control, take plywood to make control horn.
4: insert fpv material and battery and check the cg (cg on On the carbon tube)

Some video made in Polymmersion

its nice, but i think i prefer the AXN from hobbycity; it cost way less, and looks nice too
approx same size and kind of plane

http://www.hobbycity.com/hobbycity/store...oduct=8359

I know, its hard to beat hongkong

What I would like to see is the same plane, but made for FPV (you still have to move a bit things around on this one), and a little bigger, so you can carry a bit more equipement/longer flight time.
Like and easy glider with pusher motor

Yes but the axn is not unbreakable, and he is to big with the axn you can't fly between threes and other thing.
The axn is equivalent to the easystar.
With 3S1000 you have approxymatly 30min flight.

I Love It - so simple so fun

Hi Aurelien!

Great job, I love it sooooooo much
Nice painting

How about all members buy one and have same builds so we can have compititions for fun?

Like best paint job
Lowest flying

etc...

Great idea Ben!
Or we create and develop a new plane together here in the FPV-Community

Hi Muppet,

Polyclub is best fun plane on the earth.
I'm flying it since i started this hobby, i made 10+ Polyclub for me and my friends. Now have 300+ polyclub in Turkey and owners meeting as community.
My team making dogfight(non fpv) with this airplanes. We are accacking directly to the planes, not paper strips
We are making it from Depron(body) and High density Blue Foam(Wing)



I guess it will first EPP Polyclub in Turkey if i order it

PolyClub is;
- High efficency design, possible very low flying speed around 10-15km, or faster if you push the trottle.
- Ultra long flight time, My fligt record is 90 minute with 3S 1000mA battery and 5A brushless(best choose for this plane).
- 100% fun guaranty and %10.000 fun factor than other planes.
- Everyone saying same thing at the flying field "why we spending time with this planes, this guy everytime flying with big smile this small scrap!"


I flight up the clouds(500m around),
I flight at strom,
I dive to ground from 300 meter and repaired the nose in 5 minutes, then fly.

I'm suggesting this plane for everyone.

And a question, can i buy extra wing sets when i order it? Because I like my depron body setup, i want to use my current bodies with this EPP wings.

Thanks
Melih

(11-22-2009 09:38 PM)olive Wrote: [ -> ]its nice, but i think i prefer the AXN from hobbycity; it cost way less, and looks nice too
approx same size and kind of plane

http://www.hobbycity.com/hobbycity/store...oduct=8359

I know, its hard to beat hongkong

What I would like to see is the same plane, but made for FPV (you still have to move a bit things around on this one), and a little bigger, so you can carry a bit more equipement/longer flight time.
Like and easy glider with pusher motor

Hi Olive,

Actually, i have an AXN also and this 2 planes completaly different categories. AXN very fast airplane and including 30A power set. You should consantrate everytime when flying befcause very acrobatic.

Polyclug flying like freeflight. It's fliying very slow when %10 trottle(with 5A motor and 7x5 prop).
You can smoke or drink a beer or talk with your friend when it flying. Sometimes i'm leaving the tx on ground and talking with my friends. It's impossible for another planes.

Yes polyclub only for small setups, not for UAV like FPV systems, But it is perfect for fun fpv.

Ok, well I looked at the wingspan and pusher motor, global shape, and they are similar in that way, when i replied.

The post was edited for the videos and other things later, which I couldn't see when I replied.
The AXN cannot fly so low and so slow as it does sometimes in the vid. But well, one point remains, it's still a lot cheaper xD

i'm working on my own tiny plane like this polyclub for slow and fun flight, except it won't be nearly as crash resistant (not EPP and different shape) But also it cost me 12EUR to cnc cut it

I'll post it when I'm finished, probably plans as well if it flies good enough.

(11-23-2009 08:46 AM)MelihK Wrote: [ -> ]And a question, can i buy extra wing sets when i order it? Because I like my depron body setup, i want to use my current bodies with this EPP wings.

Thank's for your experience it's the same like me lol.
For the wing send an e mail to the dealer