03-10-2010, 03:19 PM
03-10-2010, 03:35 PM
Wow, looks professional and very complex!
Do you found prices?
Do you found prices?
03-10-2010, 05:20 PM
Nice find !
03-11-2010, 12:31 PM
When you press buy you wil see the prices.
And its not very expencive!
OSD techFX Motion OSD $119.69 In Stock
I pay 148 euro for a ezosd
techFX Motion OSD IMU controller overview
Hardware features:
small 2"x2.5" size
fast dsPIC 40 MIPS 80 Mhz MCU
3 axis accelerometer MMA7260Q with G selectable (IMU version only, optional on non-IMU version)
3 axis Gyroscope of IDG300's (IMU version only)
MAX 7456 On screen display video overlay NTSC and PAL formats which overlays the data sent to it from the dsPIC over the Video input
(2) RCA jacks for Video in and Video out supporting NTSC and PAL formats
GPS port for 32 channel Sannav FV-M8 (Etek EB-85A) GPS module MAX 2 HZ update rate
DGPS port for optional RTCM DGPS updates
Xbee connectors (XSC gives maximum range of 15 miles!)
256K I2C serial eeprom for storing settings, waypoints and GPS logger data
USB fullspeed 2.0 communications via FTDI chip
SPI, I2C and UART ports for using optional modules
(8) 3.3 volt IO configurable
(8) 5 volt Output configurable as PWM (servo) or TTL
10 bit a2d
ICSP port for ICD2 or Pickit2 programmers
5 volt 800 mA LDO voltage regulator
3.3 volt 800 mA LDO voltage regulator
Full power and ground planes with quality 6 layer board design minimizes noise
Power ports including 3.3, 5 volt, and ground connections
Optional 0.100 inch headers
Voltage input of 6-9 volts DC
And read the Add-ons !!!!!!!!!
http://www.thesiliconhorizon.com/cms/ind...&Itemid=59
And its not very expencive!
OSD techFX Motion OSD $119.69 In Stock
I pay 148 euro for a ezosd
techFX Motion OSD IMU controller overview
Hardware features:
small 2"x2.5" size
fast dsPIC 40 MIPS 80 Mhz MCU
3 axis accelerometer MMA7260Q with G selectable (IMU version only, optional on non-IMU version)
3 axis Gyroscope of IDG300's (IMU version only)
MAX 7456 On screen display video overlay NTSC and PAL formats which overlays the data sent to it from the dsPIC over the Video input
(2) RCA jacks for Video in and Video out supporting NTSC and PAL formats
GPS port for 32 channel Sannav FV-M8 (Etek EB-85A) GPS module MAX 2 HZ update rate
DGPS port for optional RTCM DGPS updates
Xbee connectors (XSC gives maximum range of 15 miles!)
256K I2C serial eeprom for storing settings, waypoints and GPS logger data
USB fullspeed 2.0 communications via FTDI chip
SPI, I2C and UART ports for using optional modules
(8) 3.3 volt IO configurable
(8) 5 volt Output configurable as PWM (servo) or TTL
10 bit a2d
ICSP port for ICD2 or Pickit2 programmers
5 volt 800 mA LDO voltage regulator
3.3 volt 800 mA LDO voltage regulator
Full power and ground planes with quality 6 layer board design minimizes noise
Power ports including 3.3, 5 volt, and ground connections
Optional 0.100 inch headers
Voltage input of 6-9 volts DC
And read the Add-ons !!!!!!!!!
http://www.thesiliconhorizon.com/cms/ind...&Itemid=59
03-11-2010, 09:16 PM
Sounds not too bad 
04-05-2010, 12:31 AM
Its only not shipped outside the US
So we need a US dealer to get that stuff.
Do we have some people from the USA here?
So we need a US dealer to get that stuff.
Do we have some people from the USA here?
04-05-2010, 01:19 AM
Yeah , I am in the state's but I am not a dealer .