FPV-Community.com

Hello,
Here are the steps of building the plane
I read a lot in the forums, thank you, and I want to share my ideas
sorry my English is not good, so I will represent the project with photos

I made a bit stronger fuselage
[attachment=556]

and I want to place the servos in the rear to liberate space on the sides
[attachment=557]
[attachment=558]
[attachment=559]

I started to see how to place the elements, including the Lrs
[attachment=561]
and testing with a 319 dps
[attachment=562]
[attachment=563]

and general configuration ,I cut the cover to access the latest items
[attachment=564]
[attachment=565]

3 month later ...

I replaced the system stabilization the module fma copilot2 by FY-20-A
[attachment=764]
[attachment=765]

Cam (dpc-480a) + 2 servos hyperion+support+tx 1.3ghz@850
[attachment=766]

assembling the wings and engine
[attachment=770]
[attachment=769]

and elevator+ruder
[attachment=767]
[attachment=768]

to follow ...

I've made another hatch for RX and OSD:

http://forum.rcdesign.ru/uploads/posts/4...1267399286

Hi Fjnet!

Your build log looks great, there are a lot of cables in you TS
Be care ful with interences!
I really like your idea with the stronger tail part.

@Alconaft: I followed your link and got this message: Нажмите сюда для скачивания файла.

Look's good !

Smart hatch! To get to the Logger-USB connection I have to remove the wing and pull the bundle of wires with the Logger out to connect for set-up etc. Your cargo door covered that issue very well.
A small dive into the bushes damaged an aileron today....you better put some tape over the "hinge"...
Looking forward to more pictures!

Michio

hello,
i have completed my project ... 3 month later ...

WTG fjnetcom , you got any video's yet ?

(09-27-2010 07:22 PM)Flench Wrote: [ -> ]WTG fjnetcom , you got any video's yet ?

hello,
no, i think that i make test next week =))